The LQ529 is a series of popular compact lamp-pumped Nd:YAG lasers offering uncompromising combination of the main parameters: high output power, exceptional beam quality and minimum laser head and power supply dimensions.
- HIGH PRR
- HIGH PULSE ENERGY UP TO 0.5 J
- EXCELLENT BEAM QUALITY
- ALL HARMONICS AVAILABLE UP TO 213 NM
- COMPACT SINGLE-PHASE POWER SUPPLY
- NO EXTERNAL WATER REQUIREMENTS
All the lasers of the LQ529 series are based on ring cavity and incorporate a pump chamber with diffuse ceramic reflector. Due to this technical solution the LQ529 lasers, unlike the lasers with traditional linear cavity, provide homogeneous close to flat-top laser beam profile and possess exceptional stability of output energy and spatial radiation parameters. Beam pointing stability of the LQ529 is better than 20 µrad in the vertical plane and 80 µrad in the horizontal plane.
All the critical components of the laser are thermally stabilised which in combination with vibration-proof design ensures unsurpassed long-term output radiation stability. The efficient thermostats used in the LQ529 ensure warm-up time of less than 10 min.
To reduce your time expenses on routine service of the LQ529 we provided flash lamp life time of more than 30 million pulses and foreseen easy and quick procedure of its replacement.
Closed-loop water-to-air cooling system is integrated into a compact single-phase laser power supply which can be controlled both from PC and via the remote control unit.
Pulsed Nd:YAG Laser Model LQ529
|MODEL||LQ529A (1064 NM)||LQ529A (532 NM)||LQ529A (355 NM)||LQ529A (266 NM)||LQ529A (213 NM)|
|Output energy, mJ, not less than||1064 nm||500||500||500||500||500|
|355 nm (HPV)1)||—||130||130||—||130||130|
|213 nm (HPV)1), 2)||—||25||20|
|Beam diameter, mm3)||≤ 8|
|Power consumption, W||≤ 600|
|MODEL||LQ529B (1064 NM)||LQ529B (532 NM)||LQ529B (355 NM)||LQ529B (266 NM)||LQ529B (213 NM)|
|Output energy, mJ, not less than||1064 nm||350||350||350||350||350|
|355 nm (HPV)1)||—||100||100||—||100||100|
|213 nm (HPV)1), 2)||—||18||15|
|Beam diameter, mm3)||≤ 6|
|Power consumption, W||≤ 800|
|MODEL||LQ529C (1064 NM)||LQ529C (532 NM)||LQ529C (355 NM)||LQ529C (266 NM)||LQ529C (213 NM)|
|Output energy, mJ, not less than||1064 nm||150||150||150||150||150|
|Beam diameter, mm3)||≤ 5|
|Power consumption, W||≤ 1000|
|MODEL||FOR ALL THE MODELS|
|Pulse-to-pulse energy stability, ±%2)||< 2,5|
|Pulse duration, ns3)||10…13|
|Divergence, mrad3)||≤ 1.5|
|Jitter, ns4)||≤ 1|
|Dimensions (LxWxH), mm||Laser head||615 x 180 x 120|
|Power supply||620 x 330 x 670|
* Specifications are subject to change without notice.
1) For the high-power version at 355 nm.
2) With the LG105 external fifth harmonic generator.
3) At 1064 nm.
4) Relative to the Q-Switch driver external trigger pulse.
Typical beam profiles at 532 nm and 355 nm. Near field
Dimensions of the LQ529 laser head
Dimensions of the LQ529 power supply
In the standard configuration the LQ529 laser has built-in SHG. Upon your request the SHG, THG, FHG and FiHG can be supplied as external stand-alone modules.
LG101 & LG103 External generators for Nd:YAG lasers
Upon your request the LQ529 laser can be supplemented with an optical parametric oscillator of the LP600 series. In such a combination you will have a source of continuously tuneable laser radiation within a wide spectral range (from UV to IR).
Optical Parametric Oscillator for Nd:YAG lasers
THE LZ221 RAMAN SHIFTER
Compact and easy to adjust and operate Raman shifter efficiently converts 1064 nm or 532 nm output radiation into several additional laser lines within the visible and IR range.
The IR converters are very compact devices with built-in OPO operating in the NCPM mode. The range of IR converters are laser sources providing fixed output wavelengths from 1.5 µm to 3.5 µm.
The laser can be supplemented with a variable power attenuator. Upon your choice it can be either a unit optimised for operation at one wavelength or an achromatic attenuator intended for simultaneous attenuation of all the laser harmonics from 266 nm to 1064 nm.
Attenuator of high-power laser radiation
A number of applications require quick and flexible laser beam delivery to the research object or the place of measurements. For this an optical fiber can be used but only for delivery of low pulse energy radiation (5-20 mJ). To deliver high-power radiation we offer to supplement the laser with a mirror articulated arm. To minimise losses of laser pulse energy we use special dielectric mirrors with high reflection coefficient simultaneously for 1064 nm and 532 nm.
Nd:YAG laser with mirror articulated arm
If you plan to use the LQ529 in laboratory experiments, as a bonus you will get unsurpassed operational reliability and minimisation of accompanying expenses.
If you are attracted by the reliability of the LQ529 laser and you will use it for industrial or field applications, in addition to a highest reliability you get beam quality conventionally available only for high-precision laboratory equipment.
The LQ529 is an ideal instrument for such applications as:
- Ti-Sapphire Lasers and OPO Pumping
- Dye Laser Pumping
- LIF (Laser Induced Fluorescence)
- LIBS (Laser Induced Breakdown Spectroscopy)
- PIV (Particle Image Velocimetry)
- Laser Cleaning
- Hole Drilling
- TFT-LCD repair
- Flat Panel Display (FPD) Manufacturing